You are not logged in.

#1 2019-10-01 23:25:43

Registered: 2019-10-01
Posts: 1

Power Macintosh 5500/225 No Video after third time booting.

Hi all, I recently picked up a Power Macintosh 5500/225 from a local thrift shop. I powered it on twice and shut it down twice using the proper way of doing so.
Third time I booted it the pc took a long time loading so I manually shut it down with the switch on the back, and now no video comes through when I power it on.
I looked inside and all the cables seem to be where they should be
Any tips or advice?


Board footer

About ThinkClassic

ThinkClassic specialises in the use, maintenance, repair, restoration and modification of vintage computers and peripherals.