Announcement

After 5 years serving the vintage Apple enthusiast community, ThinkClassic has been marked for closure and is now in caretaker mode. Please see this thread for further information. Please direct any questions, comments and enquiries about the website, management and ownership to this thread.

You are not logged in.

#1 2017-09-26 01:47:11

MarinatedPasta
Member
Registered: 2017-09-26
Posts: 2

Ethernet on eMac G4 won't Work

So I finally got my first proper Mac, an old eMac G4. The only problem is I cant get Ethernet to work for the life of me. Because Apple support doesn't go as far back as Tiger, and hours of searching online hasn't led to a proper solution, I figure here, where people know an insane amount about the back-ends of OS X, would hopefully be my best bet.
I am plugging the eMac into a switch -> Router -> Modem. Every other device plugged into the switch works flawlessly.
The Ethernet cable and the port its in works for other computers running Linux and windows. The ethernet card is recognized in ifconfig and System Profiler. System Preferences>Network>Network Status is empty and I cant click on the Configure or Connect buttons. Switching from Network Status to Built-in Ethernet I have TCP/IP selected and Use DHCP for "Configure IPV4," but the ip address, subnet mask, and default gateway are all blank. Switching to manual and putting the info in has no effect. When I load up the Network Diagnostics tool, everything is failed.
Look to the images for further information, and any information you need I can supply. This was a gift from a family friend so I don't have the installation disk, or any other mac to try to repair the os, but every thing else on the device works fine.
Any tips, help, or information is highly appreciated!

uploadedimage.png

*edit: Title specified.  I also posted this on the iMac/ Powerbook forums because I didn't know what the better choice would be.

Last edited by MarinatedPasta (2017-09-26 01:49:32)

Offline

Board footer

About ThinkClassic

ThinkClassic specialises in the use, maintenance, repair, restoration and modification of vintage computers and peripherals.