You are not logged in.

#1 2017-12-28 13:23:21

Tristanl
Member
Registered: 2017-12-28
Posts: 1

IIcx power issue (button needs to be hold)

Hi there,

i have some issues with the IIcx i just got. It will only hold Power while the power button is pressed (keyboard or switch in the backside) - and even then there ist no chime or picture, i'm also very sure that the HDD isn't running only the PSU and the Lights on the Computer and the Monitor.
PRAM Batterie is replaced but still no improvement. I might try to strip down the configuration (right now all RAM slots are occupied) but can't think of anything else atm.

Are there know issues with this series? (Bad PSU/Bord)

greetings

Tristan

Offline

#2 2017-12-28 16:32:36

mcdermd
Member
From: Corvallis, OR
Registered: 2014-05-12
Posts: 975
Website

Re: IIcx power issue (button needs to be hold)

More than likely you will need to replace the capacitors on the logic board. Be sure to look for any traces that have been blackened or eaten through by the capacitors' liquid electrolyte.


Daily Drivers: 27" iMac 2.8 GHz Quad-Core i7 (Late 2009), 21.5" iMac 2.7GHz Quad-Core i5 (Late 2013), 11" Macbook Air 1.6 GHz i5 (Mid-2011)
See the restored heroes here.

Offline

Board footer

About ThinkClassic

ThinkClassic specialises in the maintenance, repair, restoration and modification of Vintage Apple and Macintosh computers. Ask questions and find answers about classic Apple desktops, laptops, accessories and peripherals.