- From: UK
- Registered: 2015-03-07
- Posts: 61
Mac IIci ATX PSU Conversion
The PSU in my Mac IIci is dead. Rather than replace it with an equivalent older PSU (which I might still do if this doesn't work out), such as another one from a IIci/IIcx/Q700/PPC7100, I'm thinking I would like to convert an ATX PSU for use within the IIci.
Now, I've trawled the interwebs for information regarding this and found a variety of different resources of varying helpfulness. Two of the biggest issues I seem to have read about include the loss of softpower without a workaround (not too bothered by this) and an incompatibility with some of the voltage pinouts (no -5 on modern ATX PSUs). I'm not sure which if any of these is an issue for the IIci.
It's worth stating that I've not converted a PSU before, so the clearer the information provided, the greater the appreciation. A few questions I have for getting started include:
1) What is most likely to fit best within the IIci case with the least amount of modification - an ATX PSU, Mini ITX, etc?
2) Is there a good resource that provides a very clear pinout map of both the IIci/IIcx/Q700/7100 PSU connector AND the ATX connector?
3) Beyond matching the correct cables to eachother, what other things will I need to consider (e.g. grounding, ensuring the PSU remains on, etc.)? I've seen posts suggesting that without some sort of switch, the ATX PSU will power up and down without staying on.
Basically, I'm a complete noob regarding this and would appreciate some clear guidance if possible. Thanks in advance.
- From: Bermuda Triangle, NC USA
- Registered: 2014-05-21
- Posts: 1,374
Re: Mac IIci ATX PSU Conversion
ImAn00b2, so I'll be watching with great interest. I did compile this in my my search, it may not all be clear, but you might not have found some of the links. The ATX -> Mac Gazette AKA: ATX LinksProject™